The International Safety Equipment Association (ISEA) is the trade association for companies that design, manufacture and market emergency eyewash and shower equipment, and the association is secretariat to the American National Standard for Emergency Eyewash and Shower Equipment, ANSI/ISEA Z358.1-2014.
ISEA applauds the Occupational Health and Safety Administration (OSHA) for the publication of its InfoSheet “Health Effects from Contaminated Water in Eyewash Stations.” This document details the importance of regular maintenance of emergency eyewashes to prevent buildup of infectious organisms, including acanthamoeba, pseudomonas and Legionella.
The OSHA InfoSheet cites the importance of maintaining equipment in accordance with ANSI/ISEA Z358.1-2014, including weekly operation of plumbed units to ensure proper function and flushing the water line. ISEA would like to provide additional information regarding weekly maintenance.
The standard requires a weekly activation “long enough to verify operation and ensure that flushing fluid is available,” and contains further information in an appendix:
B7. Weekly Activation for Plumbed Emergency Eyewash and Shower Equipment
The intent of the weekly activation to be conducted on plumbed emergency eyewash and shower equipment is to ensure that there is a flushing fluid supply at the head of the device and to clear the supply line of any sediment build-up that could prevent fluid from being delivered to the head of the device and minimize microbial contamination due to stagnant water. The duration of this test is dependent on the volume of water contained in the unit itself and all sections of pipework that do not form part of a constant circulation system (also known as “dead leg” portions). Water in these sections is stagnant until a flow is activated by opening a valve. The goal is to flush out stagnant water in the dead leg completely. Where mixing valves are used, both the hot water and cold water supplies to the valve must be considered.
ISEA offers an Emergency Eyewash and Shower Equipment Selection, Installation and Use Guide, available for free on the association’s Web site, www.safetyequipment.org.
For ANSI/ISEA Z358.1-2014 standard related questions: Call 703-525-1695 or use the ISEA Contact Us Form.