ISEA Responds to Specifier and User Concerns with Major Changes to Updated Standard for High-Visibility Worker Apparel

The International Safety Equipment Association (ISEA) has received American National Standards Institute (ANSI) approval for ANSI/ISEA 107-2015 American National Standard for High-Visibility Safety Apparel and Accessories, an update to the widely-accepted standard on high-visibility safety apparel. With a few major changes and noteworthy differences, the 2015 version adds “types” to garment descriptions, combines the ANSI/ISEA 107 and 207 standards, and adds a “smallest size” offering.

The latest update was developed by ISEA’s High-Visibility Products Group and approved by key stakeholders representing utility workers, safety professionals, transportation safety experts, testing laboratories and government agencies.

ANSI/ISEA 107 is a voluntary industry consensus standard and has been recognized by federal, state and local authorities as well as private industry. Current U.S. Department of Transportation, Federal Highway Administration (FHWA) regulations have required workers on or near Federal-aid highways to wear Class 2 or Class 3 garments, and the 2009 revision to the Manual on Uniform Traffic Control Devices (MUTCD) extends this provision to workers on all roadways in the United States.

The updated standard consolidates the requirements of ANSI/ISEA 107-2010 and ANSI/ISEA 207, American National Standard for Public Safety Vests in an effort to establish a single, comprehensive document that considers all occupational tasks. While still preserving the performance class designation based on material minimum areas, the updated standard identify garment types based on expected use settings and work activities being performed, these are designated as off-road (type O), roadway and temporary traffic control (type R), or public safety activities (type P).

Fit and comfort of high-visibility safety apparel play an important role in worker acceptance of wearing these items as part of their daily activity. While previous editions provided some freedom in design that resulted in smaller sized garments capable of meeting the standard’s requirements, specifiers and users wearing garments classified as Performance Class 2 under the ANSI/ISEA 107-2010 standard edition had expressed concern regarding appropriately fitting compliant garments for smaller sized workers.

Garments that are not properly sized to fit can expose workers to catch hazards or interfere with other protective gear, potentially compromising worker safety. In response, the ANSI/ISEA 107-2015 standard edition now includes provisions for Type R Performance Class 2 and Performance Class 3 garments in the smallest size offered to utilize a reduced amount of background material to allow for sizing more appropriate for smaller workers.

Additionally and in recognizing the growing use of high-visibility accessory items, the 2015 standard adds specifications for accessories including headwear, gloves and armbands. ANSI/ISEA 107-2015 also specifies labeling requirements to identify the garment by performance class, type and by its flame resistance characteristics as defined in the standard and expands the examples of garment configurations to illustrate compliant and non-compliant designs.

“Low visibility is one of the most serious dangers on a jobsite, said Richard McNeely, chairman of the ISEA High-Visibility Products Group and market manager of ORAFOL Americas Inc. “ISEA’s High-Visibility Products Group members remain committed to ensuring that the updates in the revision serve to meet end user needs by considering all occupational tasks and hazards and to ensure garments provide visibility of the worker from either side: front or back,” said Rich.

To comply with ANSI/ISEA 107-2015, a garment’s background material, and retroreflective or combined-performance material, must be tested by an accredited laboratory. The manufacturer of the finished item then verifies that the garment or headwear meets all the requirements of the standard, and provides a Declaration of Conformity for each model.  The Declaration of Conformity and examples of test forms are included in the standard and are also available on the ISEA website.

For more information: [button url=”https://isea.wpengine.com/ansiisea-107-2015/” color=”blue”]Click Here[/button]

Search

Trending

Standards

Global PPE

Issues

We are the safety equipment industry, united in the goal of protecting workers worldwide.

Our Mission

The voice of credibility for the safety equipment industry

Members & Leadership

Learn about ISEA members, leadership and awards

Board of Trustees

Your elected officials to help guide the association

ISEA Foundation

We help develop talent and raise awareness about worker safety

Staff

Meet the team

Explore Membership

ISEA membership gives you a seat at the table, delivers powerful insights and lets you engage with peers.  

Our education & training programs improve the effectiveness of safety equipment industry professionals.

QSSP

Our education & training programs improve the effectiveness of safety equipment industry professionals.

Executive Summit

Hear progressive ideas, learn best practices, and make peer connections.

Annual Business Meeting

Collaborate on standards development and track industry & policy trends

Event Calendar

See all upcoming events

Webinar Library

Access our webinar library

We are a trusted resource for industry insights and policy, with a window to Washington

Advocacy & Issues

Gain a powerful advocate in the halls of government

Industry Impact

Measuring the impact of the safety equipment industry

Industry Intelligence

Reports and tools for ISEA members

Market Data Analysis

Benchmark market share & product growth trends

Newsroom

Access the latest safety news & insights

Buyer's Guide

Discover our buyers guide to find the right PPE for your company and people.

Learn More

Tips For Buying PPE Online

Buying PPE online? Follow our guide to ensure it’s appropriate and high quality.

Learn More